Subassemblies will place faster and can be easier to visualize if you apply a configuration where parts not necessary for placement are hidden. Exploded view configuration names are not displayed in the configuration list on the Use Configurations dialog box. To use a display configuration when placing a subassembly, you must first set the Use Configurations command on the Parts Library shortcut menu.
When you set this option and then drag and drop a subassembly into the assembly, the Use Configuration dialog box is displayed so you can select the configuration name you want to use. There are many ways you can use display configurations in the Draft environment. You can use both assembly and exploded view configurations when creating drawings in the Draft environment.
When you use the Drawing View Wizard command and choose an assembly document from the Select Model dialog box, you also can select an assembly configuration or an exploded view configuration. When you select either configuration type, the drawing view is placed with the parts displayed or hidden as they were when the configuration was saved. You can control the display of weld beads and material addition features in an assembly drawing view.
For example, you can hide the display of weld beads and material addition features, and then save a display configuration. You can then use the display configuration to place a drawing view of the assembly with these features hidden.
You can reduce complexity in a drawing view. For example, you can display tube, pipe, or frame centerlines without displaying the solid bodies of the tubes, pipes, or frames. In the Draft document, you can then use the Include reference, sketch, and construction items check box in either of the following locations:. On the General tab Solid Edge Options dialog box , you can define a document level preference.
On the Display tab Drawing View Properties dialog box , you can override individual show and hide settings for design bodies and centerlines. Display configurations are available when working with alternate assemblies. The behavior of display configurations based on whether you specify that the alternate assembly is a family of assemblies or an alternate position assembly.
For a family of assemblies, a display configuration is member-specific. In other words, the family of assembly member which is active when you create the display configuration is the only member in which you can use the display configuration later. Close search. Solid Edge. Information Title. URL Name. Summary Briefly describe the article. The summary is used in search results to help users find relevant articles.
You can improve the accuracy of search results by including phrases that your customers use to describe this issue or topic. Details Article description. This utility ensures that the following required settings outlined below are met: Validate Search Service ensures that the machine has Windows Search service up and running.
Validate Schema Path ensures that the property schema file seprops. Validate Indexing properties ensures that the Solid Edge custom properties are registered correctly in the Windows Operating system.
Enable Auditing : If you periodically experience problems with Solid Edge property schemas, these could be the result of either installing or updating another application, installing the latest updates, or antivirus software. In this case, we recommend you use Enable Auditing to identify the cause of the problem. Setting this flag to 1 allows paper space to be translated. The default is AutoCAD model space. Creates AutoCAD layer names that are derived from part file names that make up a draft file from a Solid Edge assembly.
The graphics that represent each part are then placed on these layers. Controls how a dimension is created during the import process. With this parameter, dimensions can be created as graphics or as dimensions.
The default is as graphics. Dimensions translated as dimensions are no longer supported. Controls the accuracy of the.
DXF file being created. Enables AutoCAD drawings to be opened both in the language that the drawing was created and in the language of a different country to which the drawing might be sent without any loss of information. The Code Page parameter is used during the export process. This was implemented for the support of the Kanji character set. Works along with the option to Save the Draft file to model space. When set to 1 the members of a drawing view are exported as an AutoCAD block.
When set to 0, the members of a drawing view are exported as individual entities. When you add the option to the. Defines the color for all annotations. If the Enable Layer and Attribute Mapping parameter is on it will over ride this parameter. The possible values are 1—7. The default value is 7. Exports text and callouts in an unblocked state. The default is 0, which creates blocks for all text and callouts. You can set the value to 1 if you want to export text and callouts in the unblocked state.
Exports Solid Edge multiline text boxes as multiline or single line text. The default is 1, which exports the text boxes as multiline text boxes. You can set the value to 0 if you want to export the text boxes as single line text boxes. Breaks B-spline curves at the point where duplicate control points exist.
The default value for the parameter is 1, which breaks the B-spline curves at the duplicate control points. You can set the value to 0 if you do not want to break B-spline curves at the duplicate control points. When you import polylines to Solid Edge, they are translated as a complex string element. The element will contain lines, arcs, or bspline curves. It is not suitable for placing dimensions, nor can it be used directly in the Sketch environment. You can add a Import Polyline Segments parameter to the seacad.
The executable allows you to migrate both. To use the executable to load multiple Mechanical Desktop documents, Mechanical Desktop do not have to be loaded on the same machine as Solid Edge, but it must be available on the network. Mechanical Desktop must be loaded on the same machine as the documents being migrated. You can specify the Solid Edge template you want to use to create the new Solid Edge document equivalent for the Mechanical Desktop document you are opening. You can also specify a local folder location where you want to save the Solid Edge documents you create.
The folder structure for the Mechanical Desktop document will be replicated in this folder. If you want to store the Mechanical Desktop documents as managed documents in Solid Edge, you can select the Enable Add to Library option and specify an Insight folder.
0コメント