Right-click the drawing area and select a command from the Recent Input list. Press the up-arrow or down-arrow keys to select the Action Keys Mode option, and then press the Enter key to display the menu. Select the Enabled option to require only the F1 through F12 keys to use the action as indicated on the action key, without having to press the Fn key itself. After enabling or disabling Hotkey Mode, use the hotkey as follows: Enabled: Use the hotkey function by pressing a single Fx key.
A common solution to take into consideration is to reinstall the app on your PC. Under Backup Files, double-click a drawing node to list all available drawing and backup files. Double-click a file to open it.
If the drawing file is damaged, the drawing is automatically repaired, if possible. Update Internet Explorer to IE Showing results for. Search instead for. Did you mean:.
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations.
Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service. Back to Topic Listing Previous Next. Filter by Lables. Failure while chamfering. Message 1 of 7. If a user is working offline, then by pressing this key, all the functionalities of this software will be opened in PDF format.
This key opens a pop-up screen showing the command line on the bottom. This command is useful to the user who feels difficulty in seeing the command window on the bottom of the screen. O Snap feature of this software helps to draw your drawing accurately.
This will allow you to snap at the specific location of your object while you are picking any point. For example, a user can accurately pick up two points of the line, the center of a circle, etc.
If you again press this key, the software will come out from this command. This key will open the O snap feature while working in 3 dimensional. This command will allow us to accurately pinpoint on the particular position of a body.
This command will affect the cursor movement only when the snap style is set as isometric. If the snap style is set as Isometric, Ortho mode will use the appropriate axis pair from 30, 90, and degrees.
By pressing this command again, we can alter between three ISO planes that are top, right and left. This function key turns dynamic UCS on or off. More about this system variable can be found in this AKN article. Using this command you can find the volume of a 3D solid as well as lots of other information like its moment of inertia, radius of gyration, centroid, and products of inertia.
You can extract edges of a 3D solid as 2D geometries using this tool. In the image shown here the XEDGES tool has been used to extract the edges of the 3D solid and then the solid geometry has been moved to reveal the edges only.
This command was introduced in AutoCAD Using this command you can create a section plane in the drawing that can be used to see the 3D drawings by sectioning them along different planes. This command is great for converting a 3D drawing into 2D and using this command you can also create multiple views of a single 3D drawing like the front, top and isometric on a single plane. To know more about this command follow the related article. This command can be used to detect intersecting 3D solids.
The command is especially useful in situations where you want to detect clashes between different solids like pipes and walls. Using this command you can project a 2D curve on a 3D surface, solid or region as shown in the animated image below.
Using this command you can convert a 3D solid into a hollow solid with a wall thickness. Alternatively, you can also select the shell tool from Solid editing panel of the Solid tab.
Using this command you can fill the open areas of a surface like the top of a cylinder as shown in the animated image below. As the name suggests this command can be used to make a helix in AutoCAD drawing. Using this tool you can move faces like a groove of a 3D solid from one point to other as shown in the animated image below. This command is similar to the trim command of 2D drawings but in this case, it will trim surfaces instead of 2D geometries.
Using this command you can align a 3D solid object with respect to another 3D solid, this video explains the use of this command in detail. Using this command you can offset any surface inside, outside or on both sides of the surface as shown in the animated image below. Using this tool you can record the history of solids on which boolean operations are performed and you can modify these solids later.
In the image below Subtract operation is performed on two solids and then the amount of removed part is changed by selecting the Cone by pressing CTRL key then changing its base radius. By default, the value of this system variable is 0 which keeps this feature off but you can turn it on by changing its value to 1. Using this command you can imprint 2D drawings on planar faces of a 3D solid or a surface to create additional faces for 3D tools like Presspull.
Did we miss any command or tool which should be included in this list? Let us know in the comments below. L It can be used for making simple lines in the drawing. PL This command can be used to make a Polyline in your drawing. POL This command can be used to make a polygon with minimum of 3 sides and a maximum of sides.
TR This command is used for trimming a geometry. SC This command is used to change the scale of an object. B This command is used for creating a block, the properties of the block can be defined using the block definition window. X This command can be used to explode objects like Polyline to simple lines, an array or a block to a simple geometry etc.
F This command can be used to add rounded corners to the sharp edges of the geometry, these round corners are also called fillets. CHA This command can be used to add slant edges to the sharp corners, these slant edges are also called chamfers. LA This command can be used to open layer properties manage palette which is a tool for creating and managing layers in a drawing.
Keyboard Shortcut Keys. Status Bar Toggle. F7 This status bar tool will toggle the visibility of background grid which is often visible in your drawing area. F9 Toggle Snap mode, when snap mode is active AutoCAD cursor will jump to specific points in the drawing area which is defined in snap mode.
DYNMODE By default the value of this system variable is set to -3 which keeps it off you change this system variable to 3 to make dynamic input active. F3 One the most important status bar toggles. F6 Dynamic UCS can be activated or deactivated using this function key.
General Commands. To know more about this subcommand refer the related article. SP Using this command you can check the spelling of selected text and correct the spellings from Check Spelling window.
TIME Using this command you can find a lot of information about your drawing like the date when the drawing was created and total editing time consumed on the drawing.
DI It can be used to find the distance between two points in the drawing. LIST Using this command you can find lots of properties of an object like the layer they are on, area, length or radius, perimeter or circumference and a lot more. DIM This command was introduced in AutoCAD version and it can be used to make most of the dimensions like Linear, aligned, radius, diameter and baseline.
BASE Using this command you can change the base point of a drawing without changing its origin. UNITS Using this command you can set the drawing units and other settings like the precision of linear and angular dimensions and default rotation angle. ML Using this command you can make a multiline geometry which contains multiple parallel lines.
Performance Related Commands. PURGE This command can be used to remove unused named objects like layers, blocks and dimension styles from the drawing. FILLMODE Using this system variable you can turn off or on the visibility of filled area in hatches or wide polylines by changing its value to 0 or 1 respectively.
Related: How to repair corrupt AutoCAD drawings and fix its errors MA This command is a great time saver if you want to copy properties of one object on other without changing its geometry or contents. DS Using this command you can open the drafting settings window which can be used to change settings related to status bar options like object snap, polar tracking, snap and grid settings.
Accessibility Commands. FS Using this command you can select objects which are connected to the selected object in the drawing area. PUBLISH Using this command you can print multi-sheet files directly, unlike PLOT command which only plots single sheet this command will allow you to plot multiple sheets or even all of the sheets of the drawing directly.
FIELD Fields are dynamic text information which can add a lot of intelligence to your drawing by keeping data interlinked and updated. VOLUME Using this command you can find the volume of a 3D solid as well as lots of other information like its moment of inertia, radius of gyration, centroid, and products of inertia.
0コメント